In case you’re restoring a automobile, a significant milestone within the course of is once you paint the automobile. At that stage, though nonetheless removed from completed, the venture actually begins to take form. Relying in your talent stage and ambition, it’s possible you’ll want to sort out the paint job your self.

Paint Society Portray with the Eastwood CC500 Paint Gun

In case you’ve by no means painted earlier than, the concept of portray your automobile could seem to be a enjoyable venture, or it might appear overwhelming. Though there are correct strategies to study spraying, nothing is out of the scope of a hobbyist who’s keen to observe and be taught. To get you began, Eastwood gives books and DVDspaint gunspaintssupplies, and all of the technical recommendation (see the Eastwood Blog or YouTube channel) it’s worthwhile to paint your automobile. Once you see your freshly painted automobile, the sense of accomplishment will probably be your best reward.

DIY Ferrari Paint Job by Final Rebuilds and SamCrac on YouTube

Completely different folks have totally different causes for wanting to color their automobiles. Possibly you need to say you probably did “all” the work your self, perhaps you can not afford to have it painted, perhaps you need to be taught one thing new, perhaps you need to make certain of the work that’s going into the automobile earlier than and through portray…the checklist goes on. No matter your causes, there are specific issues that should be thought of for a profitable paint job.

To get began, it’s worthwhile to develop a recreation plan. The important thing to a profitable paint job is planning your steps, taking your time, and correctly prepping the floor. In case you’re in a rush, DO NOT try to color your automotive. In case you minimize corners prepping the automobile for paint, it is going to be very noticeable within the remaining end or shortly down the street. To correctly paint a automobile, there’s much more concerned than spraying paint onto the automobile.


  • Do you might have a spot to prep and paint the automobile?
  • Do you might have (or are you keen to buy) the wanted instruments to color a automobile?
  • Are you portray the whole automobile (door jambs, trunk space, underhood, and so on) or solely the skin?
  • Will the automobile be stripped to reveal metallic, or are you going to color over the present end?
  • What sort of paint do you propose on utilizing?
    Single stage, base coat/clear coat? Urethane, acrylic enamel, acrylic lacquer, water-based?
  • What model of paint system are you going to make use of?


In case you’re contemplating portray your automobile, first consider the place you’re going to prep and spray it. Do you might have a dry place to retailer the automobile if you are prepping it? Ideally, you’ll need to spray in a clear, dirt-free, temperature-controlled setting. Are you going to lease a sprig sales space, paint in your storage, or paint in your driveway? Is it authorized to spray a automobile there? All of those elements should be thought of earlier than you consider choosing up a paint gun. Tip: if it’s unlawful to color your automobile within the space you reside, you may nonetheless strip it down and prep it for the physique store. It’s a great way to economize.

Eastwood CC500 Paint and Clear Coat Gun


You’ll want the right gear to color a automobile. At a naked minimal, you’ll want a paint gun, an air compressor that may meet the calls for of your paint gun, and a moisture separator. The moisture separator will guarantee that you’ve a dry air provide (moisture in your air provide is a simple solution to spoil a paint job). Another choice is a turbine paint system, such because the 5 Stage Turbine. It doesn’t require an air compressor, and ensures that you’ve a dry air provide.

There are two basic paint gun designs: HVLP gravity-feed and siphon-feed. Gravity-feed weapons have the cup mounted on prime of the gun, and siphon-feed weapons have the cup mounted underneath the gun. As a consequence of environmental guidelines nowadays, most paints are formulated to spray with a HVLP gun, and by chance for dwelling customers many of those spray simply superb with a smaller dwelling compressor. For extra on sorts of spray weapons, try this skilled weblog submit on the Eastwood blog.

Along with the spraying gear, you’ll additionally want security gear like painter’s coveralls, an authorized respirator, goggles, and disposable nitrile gloves. For a way more complete rationalization of portray security gear, click here.


When deciding to color your automobile, how a lot will you are taking the automobile aside? Are you going to take away the hood, trunk, doorways, glass, and so on., or are you going to tape it up and paint whereas it’s collectively? Taking every thing off means that you can be certain that there’s no hidden injury, and it means that you can get paint into nooks and crannies. Nevertheless, you’ll must cope with gapping the panels, reinstalling glass, changing seals, and so on.

In case you resolve to color the automobile whereas it’s nonetheless collectively, take away as lots of the small elements as you may: antennae, door handles, lights, locks, wipers, and so on. In case you’re leaving elements on the automotive that aren’t going to be painted, make sure you use high-quality automotive masking tape and masking paper…newspaper doesn’t minimize it.

Tip: to get paint underneath put in seals, take some nylon clothesline or coated wire and put it underneath the seal, after which masks off the seal. This may raise the seal sufficient to permit paint to spray between the seal and the physique of the automobile.


Do you propose on stripping the automobile to reveal metallic, or portray over the present end? Stripping the automobile to reveal metallic means that you can see what’s hiding underneath the paint: rust, physique filler, shoddy repairs, and different injury. Naked metallic additionally means that you can know precisely what merchandise are getting used. In case you paint over an present end (completely acceptable for some functions), you by no means actually know what’s hiding underneath the floor. Additionally, if this previous end was not correctly prepped, your new coating could flake off because of the present end flaking off. In case you don’t know the historical past of the end on the automobile, it’s typically a greater thought to strip it to reveal metallic and begin contemporary.

When portray over an present end, the end should be in fine condition. Light finishes are okay, however shouldn’t be peeling, cracked, or in any other case broken. If the automobile has been repainted, we suggest you strip the automobile down and begin from naked metallic. In case you do resolve to color over the present end, wash the automobile after which use a high-quality wax and grease remover like PRE Painting Prep on the floor. This may take away any wax that might trigger adhesion issues.

A big a part of a profitable paint job is straight associated to correct preparation. Portray a automobile is a time consuming course of that entails a number of prep. If you don’t correctly put together the automobile for paint, you’ll see defects within the end, and there may additionally be adhesion points. By way of preparation, we’re referring to rust restore, injury restore, bodywork, block sanding, utilizing the proper merchandise, holding the floor clear, correct sanding, and so on. In case you’re keen to place within the time and work, the top outcomes could make it price all of your effort. Regardless of the place you begin, correct prep is important, learn all about it on this current blog post.


Relying on the aim of your venture, you would possibly choose various kinds of paint. With restoration tasks, many hobbyists go for acrylic lacquer or acrylic enamel to duplicate the unique manufacturing facility end. In case you’re in search of sturdiness, urethanes, base coat/clear coat finishes and water-based finishes are nice decisions.

Earlier than you begin to spray, make sure you learn the paint-mixing directions and paint gun directions. Make sure your paint gun is set-up to spray the kind of end you might be utilizing. In case you’ve by no means painted earlier than (and even you probably have), it’s possible you’ll need to look into our Paintucation videos, and even the numerous movies on the Eastwood YouTube page. These movies present you keep away from frequent errors, and current a wealth of knowledge.


Typically, it’s beneficial that you just persist with one model’s paint system all through your entire portray course of. Nevertheless, there have been many profitable paint jobs which have blended merchandise. In case you resolve to combine primers and topcoats from totally different producers, we suggest you take a look at for compatibility earlier than you begin spraying in your venture.

Tip: Eastwood’s line of primerspaints and clearcoats are high-quality merchandise that work nicely with most paint programs. For repairing wavy panels, Contour Polyester Primer Surfacer can be a flexible, high-build, sprayable, polyester primer that can be utilized with most sorts of topcoats. It may be utilized over naked metallic or prepped painted surfaces.

Be real looking together with your expectations of your first paint job. It most likely gained’t be excellent. There may be dry spots, runs, grime, and/or bugs. Take your time and keep in mind that many of those issues may be corrected with shade sanding and buffing. Use every paint job as a studying expertise. With observe, the suitable gear, the suitable merchandise, and Eastwood’s skilled recommendation, you’ll be capable to produce a paint job to be pleased with.

Source link