What is Rust Converter? | Eastwood Blog


WHAT IS RUST CONVERTER EXACTLY?

Eastwood’s Rust Converter is a singular acidic paint that truly converts rust into an inert iron oxide. You may watch it work: from its unique coloration, it should progressively flip blue/black because it stabilizes rust. The proper first step in sealing your rusty steel surfaces.

HOW DO I ENSURE MY PROJECT IS FULLY PROTECTED FROM RUST?

Get the last word in corrosion safety with a simple 3-step course of:

  • 1. Prime — Use Rust Converter as a base coat for wonderful penetration and adhesion to rusty steel.
  • 2. Encapsulate — Subsequent, apply Rust Encapsulator to guard in opposition to additional rusting, fill pinholes and different floor irregularities, and for wonderful UV resistance.
  • 3. Seal — For one of the best, longest-lasting safety in opposition to rust, chipping, and scratches, topcoat with one in all our Chassis Black paints to totally seal the steel in opposition to the weather.

Rust Converter is appropriate with most polyester physique fillers, and is water-based for further security as in comparison with solvent-based coatings. One quart of Rust Converter will cowl about 50 sq. ft.

WHAT MAKES EASTWOOD RUST CONVERTER BETTER THAN OTHERS?

Rust converters work by initiating a chemical response that transforms rust right into a extra steady iron oxide. Eastwood Rust Converter is a extremely efficient and lively rust converter that’s optimized for the very best outcomes. Different rust converters go on thick and tend to create pores that may enable rust to begin once more. Eastwood Rust Converter has been formulated to be one of the best.

WHEN DO I USE RUST ENCAPSULATOR AND WHEN DO I USE RUST CONVERTER?

For finest outcomes, use Rust Encapsulator over Rust Converter. Rust Converter is meant for heavier rust. Additionally the Rust Encapsulator means that you can select amongst pink, black, silver, and different colours, offering a base primer that maximizes protection of your high coat.

The Rust Converter offers a wonderful, powerful, sturdy, and chemically steady base to be utilized beneath Rust Encapsulator for the last word corrosion safety. This double-coat method each actively converts and encapsulates the floor for probably the most sturdy safety, whereas selling wonderful topcoat adhesion. Moreover, Eastwood Rust Converter is one of the best base prep to handle rust on inner surfaces uncovered throughout panel alternative. Being water-based, it’s safer to weld close to than solvent-based coatings.

WHAT IS THE DIFFERENCE BETWEEN RUST ENCAPSULATOR AND CONVERTER?

Really they’re two very totally different merchandise.

Rust Encapsulator could be very efficient at penetrating by means of firmly adhering rust right down to the bottom steel, and it kinds a pleasant base for extra coats. The provision of a variety of colours in each aerosol and quart cans makes this ideally suited for a lot of functions. Its capacity to fill minor floor irregularities minimizes the necessity for extra primers, and speeds prep for topcoats.

Eastwood Rust Converter, then again, is an two-part acidic paint that converts rust on metal and iron to an inert blue/black iron oxide. It transitions from its unique coloration to a bluish black because it does its job of changing the floor. It kinds a skinny coating that requires extra primers to seal and stage the floor.



Source link