This product was designed for and is meant solely to be used by skilled professionals. Learn all warning statements and heed all really useful security precautions earlier than continuing.
DO NOT USE THIS SYSTEM WITHOUT SUFFICIENT VENTILATION. Customers should put on acceptable, correctly fitted NIOSH-approved (TC-19c or equal) activated charcoal cartridge respirator if a pressured fresh-air system will not be out there. At all times put on eye and face safety, in addition to gloves and protecting clothes. Don’t use this product, or be uncovered to spray mist / vapors when you’ve got respiratory issues. KEEP OUT OF REACH OF CHILDREN AND PETS.
This technique contains a number of elements. As soon as blended, this method can have hazards of all elements. Learn warnings on all packages earlier than opening. SURFACE PREPARATIONS
For greatest outcomes, apply 2K Ceramic Chassis Black over Eastwood’s Epoxy Primer: Strip, sand or blast paint to reveal naked steel and take away all traces of floor rust. Clear floor with Eastwood’s PRE (10194ZP, Quart or 10041Z, Aerosol). If any new or clean steel stays, remember to abrade floor, then re-clean with PRE or different acceptable solvent product earlier than making use of Epoxy Primer in two medium moist coats (with 30 minutes flash between). After 60 minutes flash time, however earlier than 4 days, primer could also be topcoated with 2K Ceramic Chassis Black. If greater than 4 days has handed, floor of Epoxy Primer have to be sanded earlier than making use of Ceramic Chassis Black topcoat. MIXING RATIO
Completely combine 4 components Ceramic Chassis Black to at least one half Eastwood 4:1 Urethane Activator (21854Z). As a result of excessive density ceramic content material of this product (practically 4 kilos per gallon), vital settling could happen throughout storage. Shake/stir can to deliver all ceramic nanoparticles again into suspension earlier than mixing with activator.
Combine solely as a lot 2K Ceramic Chassis Black as is required for the fast job. Pot lifetime of activated combination is about 2 hours at 70°F. APPLICATION INSTRUCTIONS
Ceramic Chassis Black could also be utilized utilizing an HVLP gun with a 1.three mm—1.7 mm fluid tip. Apply in two medium moist coats, permitting 15-20 minutes flash between coats. A dry movie thickness of two mils is really useful. If required for improved move and leveling, Ceramic Chassis Black could also be lowered by as much as 10% with a high-quality Urethane-Grade Reducer akin to Eastwood’s Zero VOC Reducer (50104ZP).
Ceramic Chassis Black ought to dry dust-free inside 20 minutes. Components can be prepared for reassembly after 24 hours (+/- relying on ambient temperatures). Full chemical resistance develops after three-five days relying on temperature and humidity situations.
Coating could also be pressured dry at 120°F for a minimum of 20 minutes, after a five-minute flash interval. Wait four-five hours after bake cycle to re-assemble.
If recoating Ceramic Chassis Black after 18-hours, floor should first be abraded to make sure ample adhesion. CLEANUP
Make sure that all containers are sealed tightly instantly after every use. Gun and tools could also be cleaned with a Gun Wash or different acceptable solvent.