How Do You Remove the Ford Bronco’s Doors?

How Do You Remove the Ford Bronco’s Doors?

Ford Bronco Full Overview

How do you take away the doorways of a brand new 2021 Ford Bronco? Undo a few bolts and an electrical plug, and yank. It is nearly that straightforward, however backing up, the very first step actually must be buying the Ford accent baggage that defend the doorways. These protecting sleeves will significantly enhance your consolation degree in dealing with these 43-54-pound doorways once they’re free. So how do you take away the 2021 Bronco’s doorways? Learn on.


The first step: Decrease the ability home windows, push the body-mounted side-view mirror ahead and out of the best way, and if in case you have the accessory door bags, slide them on.

Step two: Disconnect {the electrical} connector that controls the ability window and lock by merely pulling it out. As quickly because it’s disconnected, a spring-loaded and weather-sealed door closes to guard the connections.

Step three: Seize the BRONCO-branded ratchet and the 10mm socket from the usual device package bag that comes with each Bronco, and use it to take away two hinge bolts. The highest hinge bolt factors down; the decrease one factors up. Retailer the bolts in one of many zippered pouches within the device bag for secure protecting.

Step 4: Dealing with the door internal panel seize the door, utilizing your ahead hand (proper on the driving force aspect, left on the passenger aspect) to seek out the seize deal with that is been molded into the ahead backside aspect of the internal door panel. Use your different hand to seize the skin door deal with. Elevate up and away. PRO TIP: Open the door all the best way till it hits its restrict cease, and make a psychological be aware of the angle the door is at—you will must reinstall it at roughly the identical angle. Transfer the side-view mirror again into its regular place.

Set up

The first step: Discover the 2 little protecting rubber edge guards within the device package. Slide them onto the sting of the entrance fender within the space close to the hinges to guard the paint (simply open the entrance doorways if putting in a rear door). Then transfer the mirror housing ahead out of the best way.

Step two: Now discover the sharp little hinge information pin within the device package, and screw it into the LOWER hinge. PRO TIP: Depart this information very free, or it is going to be laborious to take away as soon as the door is mounted.

Step three: Seize the door in the identical method you held it while you eliminated it, and maneuver it into place on the similar (ideally totally open) place at which you eliminated it.

Step 4: Find the opening for the decrease hinge on the sharp tip of the information, then transfer the higher hinge onto its pin. This gap will not be seen because the decrease one is, so it would take a couple of tries to excellent this. DANGER: If the door will not be put in on the similar opening it was eliminated at, it won’t decrease securely into place and will probably fall off and be broken. PRO TIP: Have a spotter eyeball the door character line—if not aligned with the one on the fender, elevate and reposition the door, various its opening angle till it falls down into place. Merely swinging the door will not work, as friction can merely rotate the higher hinge information, protecting it out of alignment.

Step 5: Maintain the weatherproof electrical connection door open and reinsert {the electrical} plug till it clicks.

Step six: Retrieve the bolts from the device package, change them within the higher and decrease hinges, tighten them with the 10mm socket wrench, take away the door bag if put in, return the fender-protectors and hinge information pin to the tool-kit bag, shut the door, transfer the side-view mirror again into place, and roll the window up.  

Looks good! More details?

Source link